Cast Iron Patch Epoxy Automotive Industrial Maintenance Repair Kit, 2123, 2.5gm

Description

Technical Product Bulletin
METAL/STEEL REPAIR EPOXY ADHESIVE
PRODUCT DESCRIPTION:
AA-BOND 2123 is a versatile steel metal/epoxy adhesive formulation developed for modern industrial repair, casting and bonding applications where a steel-like or cast
iron finish is required.
AA-BOND 2123 is easy-to-use adhesive system contains no solvents and cures fairly rapidly at room temperature to a hard, low shrinkage solid, which bonds readily to
steel, aluminum, and other metals, wood, concrete, glass, ceramics and many plastics.
AA-BOND 2123 is tough and durable, resistant to water, mild acids and alkalis, salts and salt solutions, lubricating oils, petroleum solvents, gasoline, jet fuels, alcohol
and
many other organic and inorganic materials, While it may be attracted to a magnet, it is essentially an electrical insulator which can be readily drilled, cut, sawed and
machined with regular metal working tools Typical repair applications: jigs, molds, dies, fixtures, plumbing, automotive, castings, aircraft, ships, marine, salvage.
PRODUCT  PROPERTIES:
Appearance
Steel Grey
Cure Type
Room temperature or Heat cure
Benefits
·
Casting
·
Jigs
·
Molds
·
Forming Dies
·
Plumbing Repairs
·
Tool and dies patching
·
Automotive repairs
·
Industrial maintenance
Mix Ratio by weight
100:10 / Resin: Hardener
Substrates
Most metals, ceramic, glass and plastics
Typical Applications
Modern industrial repair, casting and bonding applications where a steel-like or cast iron finish is required.
UNCURED PROPERTIES:
Viscosity @ 25 °C,  cps
32,000
@Temperature 77.0 °F, 25°C
Thixotropic  Index
1.0
Specific Gravity, mixed
2.34
Reactive solids contents, %
100
Pot Life
30 minutes
CURED PROPERTIES:
Hardness, Shore D
88
Machinability
Good
Magnetic
Yes
CURE SCHEDULE:
4 Hours
@ 65°C
24 Hours
@ 25°C
THERMAL PROPERTIES:
CTE, linear
21.1 µin/in-°F
@Temperature 68.0 °F
Thermal Conductivity
4.09 BTU-in/hr-ft²-°F
Operating Temperature
-60 to 135 °C
Glass Transition Temp, Tg
110 °C    230 °F
Shrinkage
0.080 %
GENERAL INFORMATION:
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
HOW TO USE:
1)
Carefully clean and dry all surfaces to be bonded.
2)
Apply this completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3)
Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4)
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY:
This epoxy can be supplied in various different packages.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application